Concrete pumping prices in Florida range from roughly $150 to $300 per hour in 2026, depending on the type of pump, the pour location, and how much concrete you’re moving. That’s the short answer. The longer answer involves understanding how pumping companies actually bill, what drives costs up or down, and how to avoid surprises on your invoice. We pump concrete across North Central Florida every week, and we’re going to break down exactly what you should expect to pay. If you want to see the full range of concrete pumping services we offer, start there.
Most contractors and homeowners calling for pricing want a simple number. Fair enough. But concrete pumping isn’t like buying lumber. The job dictates the cost. A 40-yard residential driveway pour is a different animal than a 200-yard commercial slab with a 150-foot reach requirement. Both need a pump. Both cost different amounts. Knowing why helps you budget accurately and pick the right pumping company.
We bill hourly with a minimum fee. No fuel surcharges, no primer fees, no line charges tacked on at the end. That “no hidden fees” approach matters more than most people realize until they get a bill from someone else.
How Much Does It Cost to Get Concrete Pumped?
For most residential and light commercial jobs in Florida, expect to pay between $150 and $250 per hour for a line pump and $200 and $300+ per hour for a boom pump. Every pumping company sets a minimum, typically covering the first 2 to 4 hours. That minimum exists because mobilizing a pump truck, cleaning it, and driving it to your site costs real money regardless of how long the pour takes.
Here’s a realistic breakdown for common job types in 2026:
- Residential driveway (30-50 yards): $800 – $1,500 total with a line pump
- House slab / foundation (80-150 yards): $1,200 – $2,500 depending on pump type and pour complexity
- Commercial slab or elevated pour: $1,500 – $4,000+ depending on volume, height, and boom requirements
- Small jobs (sidewalks, patios under 20 yards): You’ll likely pay the minimum fee, usually $600 – $1,000
These ranges reflect North Central Florida pricing. South Florida and metro Orlando tend to run higher due to demand and operating costs.
How Much Does a Concrete Pump Charge Per Hour?
Hourly rates depend primarily on the type of pump you need.
Line Pump Hourly Rates
A line pump (also called a trailer pump or ground-line pump) typically runs $150 to $250 per hour in Florida. Line pumps work well for ground-level pours: driveways, slabs on grade, footers, and flatwork. The concrete travels through a steel pipeline laid along the ground from the pump to the pour point. They’re the workhorse of residential concrete pumping.
Line pumps cost less per hour because the equipment is smaller and more affordable to operate. But they take longer on big pours and can’t reach over obstacles. For straightforward ground-level work under about 100 yards, a line pump is usually the most cost-effective choice.
Boom Pump Hourly Rates
A boom pump runs $200 to $300+ per hour. The boom is the articulating arm mounted on the truck that can reach over houses, walls, fences, and other obstacles. Boom pumps move concrete faster (often 100+ cubic yards per hour) and can place it precisely where you need it without running pipe across your entire jobsite.
You’ll need a boom pump for elevated pours, second-story work, pours behind structures with no ground access, and any job where speed and precision justify the higher hourly rate. On large commercial pours, a boom pump often costs less total because it finishes the job in half the time a line pump would take.
How Much Is a Concrete Pump Per Day?
Day rates aren’t standard in the pumping industry. Most companies, including ours, bill hourly. But if you’re trying to estimate a full-day pour, figure 6 to 8 working hours and do the math.
A full day with a line pump: roughly $1,200 to $2,000.
A full day with a boom pump: roughly $1,800 to $3,000+.
Keep in mind that most pours don’t take a full day. A typical residential pour runs 2 to 4 hours of actual pumping time. The meter starts when the pump is set up and primed, and it stops when the pump is cleaned up at the end of the job. We include cleanup in the hourly rate; other companies may bill it separately, so ask before you book.
How Do Concrete Pumps Charge?
There are three common billing models in the concrete pumping industry:
- Hourly rate with a minimum fee. This is the most common and, in our view, the most honest. You pay for the time the pump is on your job. There’s a minimum (usually 2 to 4 hours) to cover mobilization. This is how we bill at Croft Concrete Pumping.
- Per-cubic-yard pricing. Some companies charge $15 to $40 per cubic yard pumped. This can work out cheaper on large-volume pours but more expensive on small ones. It also creates an incentive for the pumping company to slow down, which doesn’t help anyone.
- Flat-rate bids. Occasionally offered on well-defined jobs. The pumping company estimates the total time and gives you a fixed price. Good when accurate. Risky when the job runs long and the pump operator starts watching the clock.
We prefer hourly billing because it’s transparent. You see exactly what you’re paying for. And because we don’t add fuel surcharges, primer fees, or other line items, the hourly rate is the rate. Period.
What Drives Concrete Pumping Costs Up (or Down)?
Several factors move the needle on your final cost:
- Pump type. Boom pumps cost more per hour than line pumps. But they pump faster, so total cost can go either way.
- Job size. More yards means more hours, but the per-yard cost drops as volume increases because setup and teardown are fixed.
- Accessibility. If the pump truck can park close to the pour, things go faster. Tight lots, long driveways, or pours behind buildings may require extra pipeline or a boom, adding cost.
- Distance from the pumping company. We serve North Central Florida, including Lake Butler, Gainesville, Ocala, Live Oak, and surrounding areas. Jobs farther out may factor in travel time depending on the company.
- Concrete mix design. High-strength mixes, fiber-reinforced concrete, and mixes with large aggregate can slow the pumping rate. Slower pumping means more hours.
- Ready-mix coordination. If your concrete trucks show up late or there are gaps between loads, the pump sits idle. Some companies charge waiting time. Tight scheduling with your batch plant keeps costs down.
- Weather delays. Florida weather is Florida weather. If a storm rolls in mid-pour, there may be downtime. Planning around the forecast helps avoid this.
How to Get the Best Price on Concrete Pumping
You don’t need to shop five companies for the lowest hourly rate. The cheapest pump isn’t always the cheapest pour. Here’s what actually saves money:
- Right-size the pump. Don’t rent a boom pump for a 30-yard driveway. Don’t try to run a line pump on a job that clearly needs a boom. Matching the equipment to the job is the single biggest cost lever.
- Coordinate your ready-mix. Have trucks timed so they arrive in sequence with minimal gaps. Every 15-minute gap between loads is 15 minutes of pump time you’re paying for.
- Prep the site before the pump arrives. Forms set. Rebar in place. Grade crew ready. The pump’s hourly rate is the most expensive clock on your jobsite.
- Provide accurate job details when you call for an estimate. Total yards, pour type, site access, distance from the road to the pour point. Better information gets you a better estimate and the right equipment on the first trip.
- Ask about hidden fees. Fuel surcharges, primer charges, wash-out fees, Saturday rates. Not everyone is upfront about these. We don’t charge them, but make sure you ask whoever you’re calling.
Why Hire a Concrete Pump Instead of Wheelbarrowing?
On small jobs (under 5 yards), you might get away with wheelbarrows and a strong back. Beyond that, the math favors a pump almost every time.
A pump places concrete faster, with less labor, and with better consistency. A 50-yard pour that would take a crew of six with wheelbarrows half a day finishes in 2 hours with a line pump. Factor in the labor cost of those six workers for a full day versus 2 hours of pump time, and the pump pays for itself.
Pumped concrete also flows into forms more evenly, reducing voids and improving the finished product. For anything with elevation changes, long distances from truck to pour, or tight access, there’s really no practical alternative.
Get a Concrete Pumping Estimate
We give free estimates for any concrete pumping job in North Central Florida. Call us at (386) 623-1782, email office@croftconcrete.com, or fill out our contact form. Tell us what you’re pouring, how many yards, and where. We’ll get back to you with honest pricing and help you figure out which pump is right for the job.
Croft Concrete Pumping has been serving North Central Florida since 2003. Owner-led company. Hourly billing with no hidden fees. We show up on time, pump clean, and keep your pour moving.
Frequently Asked Questions About Concrete Pumping Costs
How much does it cost to get concrete pumped?
In Florida, most concrete pumping jobs cost between $800 and $2,500 total. Line pumps run $150 to $250 per hour, boom pumps run $200 to $300+ per hour, and most companies set a minimum fee covering the first 2 to 4 hours. Your total depends on the pump type, pour volume, and job complexity.
How much does a concrete pump charge per hour?
Hourly rates in Florida typically range from $150 to $250 for a line pump and $200 to $300+ for a boom pump. Rates vary by region and company. Always ask whether the hourly rate includes cleanup and whether there are additional fees for fuel, primer, or wash-out.
How much is a concrete pump per day?
Most pumping companies bill hourly rather than daily. For a full day of pumping (6 to 8 hours), expect $1,200 to $2,000 for a line pump or $1,800 to $3,000+ for a boom pump. Most residential pours finish in 2 to 4 hours, so a full-day rate is rarely needed.
How do concrete pumps charge?
The most common billing model is hourly with a minimum fee. Some companies charge per cubic yard ($15 to $40/yd), and some offer flat-rate bids on well-defined jobs. Hourly billing is the most transparent because you pay only for the time the pump is actively on your job.
Is it cheaper to use a line pump or a boom pump?
Line pumps cost less per hour, but boom pumps move concrete faster. For small ground-level pours, a line pump saves money. For large pours or jobs requiring reach over obstacles, a boom pump often costs less total because it finishes sooner. The right pump for the job is usually the most cost-effective choice.